Frequently Asked Questions
Want to know more? Contact us at info@synergywood.com.
WHAT CAN I EXPECT FROM SYNERGY WOOD® PRODUCTS?
Discover more about our manufacturing process, how to use the wood delivered to your job site, and our grading process. Click What to Expect.
WHAT IS END-MATCHING? WHY IS IT BENEFICIAL?
End matching is the process of double end-trimming each plank using boards milled with a tongue and groove on the plank ends. This provides a male and female end, allowing the boards to be interlocked during installation and creating a mechanical bond. When boards are interlocked through end-matching, cupping potential is eliminated and wood expansion and contraction are better tolerated.
End-matched products provide many benefits including reduced waste and less labor, creating clean lines, reduce the effect of wood movement and easy installation.
Synergy Wood tongue & groove is available in V-Joint and Nickel Joint (gives a shiplap look). Check out our tongue and groove guide.
HOW MUCH WOOD DO I NEED?
Our products are delivered to specification by linear feet required for your project. To calculate the amount of linear feet needed for your project, multiply the total number of square feet by 2.52 (Red Grandis Multiplier is 2.65). The resulting number includes a 5% waste factor.
For example, an exterior porch lanai measures 15′ x 30′.
L(15) x W(30) = Square Feet Total (450)
SF(450) x 2.52 = Synergy Linear Feet (1,134)
You will need 1,134 linear feet of Synergy/E-Peck® to cover a 450 square feet porch lanai.
HOW TO CARE FOR YOUR WOOD CEILING OR WALL
Synergy Wood products are easy to care for and need little maintenance to keep it looking new and fresh. (see cleaning and care instructions).
HOW MUCH WASTE SHOULD I ACCOUNT FOR WITH SYNERGY WOOD?
Because every board is hand selected and end-matched, we recommend accounting for 5% waste. All trimmed boards with a male or female end-match are usable, regardless of their length (see installation instructions). If you are installing it yourself or are doing an intricate pattern, you may want to allow 10% or more waste. Feel free to contact us for assistance.
During our manufacturing process, we remove the normal defects found naturally in wood, which includes end checking (slight splits) and unsound knots (knots that have a chance of falling out). We strive to provide you with a 99.5% usable board.
CAN I RETURN EXTRA OR UNUSED MATERIAL?
No. Each order is custom made to project specifications.
ONE OF MY BOARDS IS SLIGHTLY BOWED. CAN THIS BE USED?
Yes. Because all boards are end-matched, slightly warped or bowed planks can be used. We recommend using them as beginning or end pieces in your project to alleviate this natural attribute of wood. Click here to see how to use what was delivered.
DOES SYNERGY WOOD CARRY A WARRANTY?
Yes. All our products carry a five-year limited warranty for any defects in the coatings or workmanship of the coatings. Our products are designed for interior and covered exterior applications. Applications where our products are exposed to direct sunlight or moisture will not be covered under this warranty.
WHAT GRADE WOOD IS USED IN SYNERGY WOOD? WHAT DOES IT MEAN?
We use SB Grade Red Grandis, and #2 and C Southern Pine.
- Red Grandis Clear of most knots and fewer color variations
- #2 Southern Pine Allows for large knots and some color variation
- C Southern Pine Mostly clear, occasional tight knot
Read our Synergy Grading Guide to learn more about the grades of our wood.
DO YOU PROVIDE INSTALLATION GUIDES?
Our products are quick and easy to install. For help in your installation, please see our installation guide page. from one of the following guides.
Need more information or help with the installation? Contact us at info@synergywood.com or call direct at 866-791-6714.
Live in California? Check out the California Prop 65 information regarding using wood products.
WHERE DO I USE YOUR WOOD?
Currently, we manufacture our products using Southern Pine (Softwood) and Red Grandis (Hardwood). Installation of our Synergy products should be limited to interior ceilings or walls, or covered exterior ceilings or walls. Though we offer a 5-year warranty, installing our products in direct exposure to sunlight or moisture will release our liability should your wood defect in any way.
Caring for your installed Synergy Wood products is easy. Check out our Care Guide.
If you are uncertain about the area in which you would like to install our product, please contact us at info@synergywood.com or call us direct at 866-791-6714.
HOW DO I PURCHASE SYNERGY WOOD?
In most areas throughout the country, Synergy Wood has developed distributor relationships and our products can be purchased through an authorized reseller/dealer. Typically you will find our products at building material stores, lumber resellers, and flooring design centers. If you don’t see our display in your store, ask for Synergy Wood by name.
To locate a dealer convenient to your area, please contact us at info@synergywood.com or call us direct at 866-791-6714.